1、 Working principle of straightener
A straightener is a hardware component used to straighten the door panel, prevent deformation of the door panel, or correct the deformed door panel. The material is mainly aluminum, and the bearing is made of iron. The 6.5 core principle is to use the elasticity of the metal itself to form a force opposite to the cabinet door. Simply put, the door panel is bent inward, and the straightener is bent outward, and vice versa. The styles of straighteners: There are minimalist, Weifa straighteners, Weifa A straighteners, Weifa B straighteners. When do we need straighteners?
For the best effect of the straightener, do not install it in the middle, as the hinge can play a part of preventing the deformation of the door panel. The straightener can only solve the problem of preventing upper and lower deformation, but cannot solve diagonal deformation. Usually, the straightener is installed on the side near the handle of the door, and the best installation position is at one-third of the cabinet door.
2、 Application fields of straighteners
If the cabinet door is higher than 1.8 meters, it needs to be installed. The cabinet door is made of particle board, European pine board, and density board. If the height exceeds 1.8 meters, a straightener needs to be installed. Although it cannot completely prevent the cabinet from changing, it can to some extent slow down the deformation of the cabinet door and increase its service life.
3、 Structural design of straightener
The structural design of a straightener needs to consider multiple factors, including material strength, structural stability, ease of operation, and equipment safety. When designing, it is necessary to consider factors such as the size of the sheet metal, the type of material, the working environment, and the experience of the operators to meet the needs of different application environments.
In addition, the principles of angle and force, as well as the safety of operation, need to be considered during the production process. In order to ensure that the door panel is straightened and flat, it is necessary to supervise the production of the product, including size, tension, noise prevention, etc